Getting a sun-kissed glow can be difficult, especially when you’re stuck inside or don’t have the time to lay out in the sun. However, with self tanning foam, you can quickly achieve that beach-ready look all year round.
Using a self tanning foam is a great way to get a natural-looking, sun-kissed glow without any of the harmful effects of the sun. In this blog post, we’ll share tips and tricks on using self tanning foam to get that perfect beach-ready glow!
One of the most critical steps when using self tanning foam is exfoliating. Exfoliating helps remove any dry skin cells, dirt, and oils that may be blocking your pores, preventing the tanning product from being properly absorbed.
You can exfoliate with a loofah or a scrub. Focus on your elbows, knees, feet, and ankles. These areas tend to be the driest. When you’re done exfoliating, pat yourself down with a towel until your skin is dehydrated before moving on to the next step.
Before you apply any self tanning foam, it is essential to take the time to shave your skin. This will help to ensure an even application and an even tan afterward. You can skip this step if you want to keep your current tan.
When shaving, use a sharp razor and shave in the direction of the hair growth to avoid any nicks or cuts that can ruin the application of self-tanning foam. It is also a good idea to use a moisturizing shaving cream or gel when shaving so that the skin stays hydrated and healthy. After shaving, make sure to rinse off any residual product with lukewarm water.
Use a mitt
When using self tanning foam, it’s essential to make sure that you use a mitt to apply it. This will help to spread the product and avoid streaks evenly. Make sure to use a glove specifically designed for self tanning, as other materials may not be suitable.
When applying the foam, be sure to use circular motions and starting from the ankles and working your way up. Don’t forget to cover your hands and feet thoroughly.
Take extra care when applying the foam around elbows, knees, and other tricky areas, ensuring even coverage. After using the foam, wash your hands and mitt with soap and water.
When applying self tanning foam, the key is to do it evenly. Start by ensuring your skin is dehydrated and free of oils, lotions, or deodorant before you begin.
Take the tanning mitt and start in one area of your body, like your leg or arm. Take a generous dollop of foam on the mitt and rub in circular motions all over the body section until it’s fully covered. Work your way up and down your body, ensuring you blend it.
Avoid going over the same area multiple times, as this can cause an uneven color. Be sure to apply to all areas exposed to the sun, such as your face, neck, chest, and back. Once you’ve finished, allow the product to dry for at least 10 minutes before getting dressed.
Set your timer
When you’re ready to apply your self tanning foam, it’s essential to set a timer. This ensures you don’t over-apply the product or leave it on for too long. Depending on your brand and type, the time can range from three to 20 minutes. Read the instructions for your specific product to get the exact time.
To ensure a streak-free application, apply your foam in sections, working one area of your body at a time. Make sure to keep track of the time so that you can move on to the next section before the timer runs out.
You should also remember to wash your hands between sections to avoid staining them with the product. Once you’re done, you can stand back and admire your beach-ready glow!
If you want to achieve a sun-kissed glow without spending hours in the sun, self-tanning foam is the perfect solution. Not only is it easy to use, but it also allows you to customize your look with different shades. To get the best results, exfoliate, shave, and use a mitt when applying the foam. With a little effort, you can look beach-ready in no time!