The laser methane detector is a gas detection device used to remotely measure methane gas. When used, the device emits two laser beams, one red or green laser used to point to the detection area, and the other infrared laser used to measure long distances. The laser methane detector has the advantages of high sensitivity, fast alarm speed, strong pertinence, long service life, low operating cost, and is suitable for ultra-long-distance detection. It is mainly used for natural gas leak detection.
The CH-4 laser methane detector adopts the world’s most advanced laser gas detection technology. It weighs 770 g and easy to carry. It can be adapted to the M200 V2 series flying platform as an example, with a single operation time of up to 30 minutes and a cruising range of up to 20km. The installation and preparation of the entire aircraft is easy and simple. You only need to unfold the aircraft arms, install the detector, tripod and propellers, and it can take off without debugging. Users can obtain the methane concentration value of the detection point and the real-time picture of the scene on the remote control terminal in real time. It can be adapted to other flight platforms (rotor, fixed wing, VTOL models) to meet more application scenarios.
Comparison with Traditional Methane Detectors
Compared with traditional portable methane detectors, this method of carrying laser methane detectors on drones is more convenient, does not require maintenance and calibration, is not affected by dust, water vapor and other gases, and will not misidentify other gases. Report. During inspections in high-risk areas, inspectors can keep a safe distance to conduct remote measurements to determine whether there are hidden dangers ahead. In blind spots and places where inspectors cannot reach, they can know the measurement results by just moving their fingers, saving manpower. The load also integrates a visible light sensor and a laser rangefinder to realize visual inspection and accurately locate the leak point coordinates in real time.
The Composition of the Laser Methane Detector:
Applications of Laser Methane Detector in the Environment:
Through the above explanation of the principle, characteristics and functions of the laser methane detector, it is determined that it can be widely used in urban gas transmission and distribution pipelines, refineries, chemical plants, metallurgical industries, power industries and other places where gas leakage may occur.
Laser methane leak detector detects whether there is leakage in gas pipeline:
It can make inspections more convenient for pipeline safety inspections in old communities and in inaccessible places.
Inaccessible places in old communities:
It can also be more convenient in detecting gas leaks in gas stations, natural gas transportation pipelines, and buried pipelines. The long-distance telemetry function also greatly saves labor costs. It can quickly detect and display the concentration of leaks at easy leak points.
Laser Methane Detector Also Involves Application Scenarios:
1. Natural gas overhead pipe;
2. Natural gas storage tanks;
3. The area where natural gas may accumulate on the roof of the building;
4. Conduct indoor testing through glass without entering the house;
5. Detect gas leakage hazard areas where personnel should not reach.
UAV methane detector are good at using the power of science and technology to ensure public safety, allowing technology to build a “firewall” for security.